Tag Archives: Sony DSC-RX100M3 firmware update

Sony Releases Upgrade to Firmware Version 1.20 for RX100 III Camera

Within the past few days, Sony released an upgrade to the firmware of its DSC-RX100 III camera, sometimes referred to as the RX100M3. This new firmware update, Version 1.20, addresses a problem that caused the camera to take an unusually long time to start up from being powered off, after the Smart Remote Control app was downloaded to the camera. The update does not add any new features, but this correction for the startup-time issue is a welcome one. The improvement in the time for the camera to start up with the new firmware version was dramatic for my camera.

Here is a link to a page at Sony’s support site, where you have to choose the operating system of the computer you will use for installing the update:

http://esupport.sony.com/US/p/model-home.pl?mdl=DSCRX100M3&LOC=3#/downloadTab

The procedure is explained at Sony’s site. Basically, you have to download and install on your computer a firmware-updating program, then, when prompted, connect the RX100 III camera to the computer using the camera’s USB cable, and follow the instructions on the computer and camera screens. The update will take several minutes to install. I initially was not able to install the updater program using my Macintosh running the new Yosemite operating system, which was not  compatible with the first release of the update. I eventually succeeded using a computer running Windows 8.1. However, Sony later added a “driver loader” to help with the installation.  Look for this message on the firmware download page for the Mac:

” IMPORTANT: For OS X version 10.10, please ensure the Mac OS X 10.10 Driver Loader has been installed before continuing to update your firmware.”

If you install that extra file before upgrading the firmware, my understanding is that the firmware will now work with a Mac running the Yosemite OS.

To determine whether you need this update, you can go to the Setup menu and select the Version item; if the Version is 1.00 or 1.10, then you need the update, which changes the Version to 1.20.

Sony Releases Firmware Update 1.10 for DSC-RX100 III Camera

Sony has just released an update of the firmware for the DSC-RX100 III camera, also referred to as the DSC-RX100M3. This update, which is numbered Version 1.10, does not add any new features or make any major changes to the way the camera operates; according to Sony, the update “resolves an issue where the camera may not power on in certain situations.”

Also, the update appears to address an issue with the use of the Soft Skin Effect option when recording video. With the original firmware release, when recording video in Intelligent Auto mode with Face Detection turned on, the camera activated the Soft Skin Effect setting and you could not turn it off. Many users found it undesirable to have that effect turned on, and they found it difficult to achieve good autofocus on faces with Face Detection turned off. With the firmware update, it is now possible to have Face Detection turned on but Soft Skin Effect turned off, when recording video in Intelligent Auto mode. I have not found a huge difference in the actual appearance of videos shot after this update, but that may just be because of the particular conditions I was shooting under. In any event, you now have the option of turning Soft Skin Effect off, which gives you more flexibility in your settings for recording video.

I installed the update using my Macintosh computer; the process took about 15 minutes. When the process was finished, I checked the Version item on screen 6 of the Setup menu, which confirmed that the camera now had Version 1.10 installed, instead of the original Version 1.00. I have not noticed any changes in the operation of the camera, but I’m always glad to have the latest version of the firmware installed.

To get the update, you can visit Sony’s site at http://esupport.sony.com and search for the camera’s model number, DSCRX100M3.  Here is a link to the page where I found the update.

You need to be careful to follow the instructions carefully, by, for example, having a fully-charged battery in the camera, removing the memory card, and connecting the camera to the computer using the Sony USB cable when prompted by the firmware updating software.

For general information about the RX100 III camera, see my book, Photographer’s Guide to the Sony DSC-RX100 III, available through this site and various online sellers.